ABB ACS 800 Series, Firmware Manual

Page: 127 / 340

Program features
127
Settings
Diagnostics
Application message blocking
You can use parameter 97.17 APL LIM WRN MASK to block the application
messages if you do not need the messages. When a message is blocked, the
relevant function remains in use, but the message itself is not shown on the control
panel display and in the PC tool history.
You can activate or deactivate the messages by setting or resetting the individual
message masking bits. Bit value “1” activates the message: the combined value of
the bits has to be entered in integer format.
The messages and the corresponding masking bits are as follows:
Parameter Additional information
77.01
77.03
77.04
… 77.19
Selection of Load speed control
Setting of time period for holding the speed reference at base speed
Setting of speed limits according to motor current at the base speed
Actual signal Additional information
03.32 bit 10 Load speed control error bit
03.32 bit 5
03.32 bit 6
Speed is limited in the forward direction by the Load speed control function
Speed is limited in the reverse direction by the Load speed control function
Warnings
LOAD SP UP LIM
LOAD SP DW LIM Speed limited in the forward direction by the Load speed control function
Speed limited in the reverse direction by the Load speed control function
Bit Messages Default
0 SLOW DOWN UP (FFF4)
SLOW DOWN DOWN (FFF5) 0
1 HIGHEND LIMIT (FFF6)
LOWEND LIMIT (FFF7) 0
2 LOAD SP UP LIM (FFB8)
LOAD SP DW LIM (FFB9) 0
3 JOYSTICK CHECK (FFFA) 1
4 ZERO POS WARN (FFFB) 1
5 START HIGH (FFB3) 1
6 HOMING ACTIVE (FFB1)
HOMING DONE (FFB0) 1
7 FLWR1 LIM/FLT (FFFD)
FLWR2 LIM/FLT (FFFE)
FLWR3 LIM/FLT (FFB5)
FLWR4 LIM/FLT (FFB4)
1
8 MASTERLIM/FLT (FFB2) 1
9 START INTERLOCK 1