ABB ACS 800 Series, Firmware Manual

Page: 45 / 340

Control panel
45
Parameter mode
In the Parameter Mode, you can:
• view the parameter values
• change the parameter settings.
The panel enters the Parameter Mode when you press the PAR key.
How to select a parameter and change the value
Step Action Press key Display
1. To enter the Parameter Mode.
1 L -> 1242.0 rpm O
10 START/STOP/DIR
01 EXT1 STRT/STP/DIR
DI1,2
2. To select a group.
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
01 KEYPAD REF SEL
REF1 (rpm)
3. To select a parameter within a group.
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
03 EXT REF1 SELECT
AI1
4. To enter the parameter setting function.
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
03 EXT REF1 SELECT
[AI1]
5. To change the parameter value.
- (slow change for numbers and text)
- (fast change for numbers only)
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
03 EXT REF1 SELECT
[AI2]
6a. To save the new value.
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
03 EXT REF1 SELECT
AI2
6b. To cancel the new setting and keep the original value,
press any of the mode selection keys.
The selected mode is entered.
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
03 EXT REF1 SELECT
AI1
PAR
ENTER
ENTER
ACT
FUNC DRIVE
PAR