ABB ACS 800 Series, Firmware Manual

Page: 16 / 340

16
Contents
The manual consists of the following chapters:
• Start-up and control through the I/O interface instructs in setting up the control
program, and how to start, stop and regulate the speed of the drive.
• Quick start-up guide describes the quick start-up procedure while using different
control schemes and a different drive configuration.
• Control panel gives instructions on using the panel.
• Program features contains the feature descriptions and the reference lists of the
user settings and diagnostic signals.
• Application macros, control location EXT1/EXT2 contains a short description of
each macro together with a connection diagram and also short descriptions of the
control locations and modes.
• Actual signals and parameters describes the actual signals and parameters of the
drive.
• Fieldbus control describes the communication through the serial communication
links.
• Fault tracing lists the warning and fault messages with the possible causes and
remedies.
• Adaptive Programming examples for crane control includes examples of Adaptive
Programming (AP) for Crane control program (+N697).
• Analogue Extension Module describes the communication between the drive and
the analogue I/O extension (optional).
• Additional data: actual signals and parameters contains more information on the
actual signals and parameters.
• Control block diagrams
• DriveWindow contains a screenshot of DriveWindow connected to the ACS800
RMIO/RDCO board and channel CH3.