ABB ACS 800 Series, Firmware Manual

Page: 327 / 340

Additional data: actual signals and parameters
327
27.04 BR THERM T CONST 0 s 529
27.05 MAX CONT BR POWER 0 kW 530
27.06 BC CTRL MODE COMMON DC 531
30 FAULT FUNCTIONS
30.01 AI<MIN FUNCTION FAULT 601
30.02 PANEL LOSS FAULT 602
30.03 EXTERNAL FAULT NOT SEL 603
30.04 MOTOR THERM PROT NO 604
30.05 MOT THERM P MODE DTC/USER MODE 605
30.06 MOTOR THERM TIME (calculated) 606
30.07 MOTOR LOAD CURVE 100.0% 607
30.08 ZERO SPEED LOAD 74.0% 608
30.09 BREAK POINT 45.0 Hz 609
30.10 STALL FUNCTION FAULT 610
30.11 STALL FREQ HI 20.0 Hz 611
30.12 STALL TIME 20.00 s 612
30.13 UNDERLOAD FUNC NO 613
30.14 UNDERLOAD TIME 600.0 s 614
30.15 UNDERLOAD CURVE 1 615
30.16 MOTOR PHASE LOSS NO 616
30.17 EARTH FAULT FAULT 617
30.18 COMM FLT FUNC FAULT 618
30.19 MAIN REF DS T-OUT 3.00 s 619
30.21 AUX DS T-OUT 3.0 s 621
30.22 IO CONFIG FUNC WARNING 622
30.23 LIMIT WARNING 0 623
30.24 EXT FAULT PTR 0 624
33 INFORMATION
33.01 SOFTWARE VERSION (Version) 676
33.02 APPL SW VERSION (Version) 677
33.03 TEST DATE (Date) 678
34 PROCESS VARIABLE
34.04 MOTOR SP FILT TIM 100 ms 704
34.05 TORQ ACT FILT TIM 100 ms 705
35 MOT TEMP MEAS
35.01 MOT 1 TEMP AI1 SEL NOT IN USE 726
35.02 MOT 1 TEMP ALM L 110 727
35.03 MOT 1 TEMP FLT L 130 728
35.04 MOT 2 TEMP AI2 SEL NOT IN USE 729
35.05 MOT 2 TEMP ALM L 110 730
35.06 MOT 2 TEMP FLT L 130 731
35.07 MOT MOD COMPENSAT YES 732
42 BRAKE CONTROL
42.01 BRAKE CTRL ON -
42.02 BRAKE ACKNOWLEDGE OFF -
42.03 BRAKE OPEN DELAY 1 s -
42.04 BRAKE CLOSE DELAY 2 s -
42.05 ABS BRAKE CLS SPD 30 rpm -
42.06 BRAKE FAULT FUNC FAULT -
42.07 STRT TORQ REF SEL PAR 42.08 -
42.08 START TORQ REF 50% -
42.09 EXTEND RUN T 60 s -
42.10 LOW REF BRK HOLD 0.0 s -
42.11 MOTOR SLIP SPD 10 rpm -
42.12 SLIP FAULT DELAY 0.5 s -
42.13 BRK LONG FLT DLY 10 s -
42.14 SAFETY CLOSE CMD ENABLE -
42.15 BRAKE ACKN PTR 0 -
Index Name/Selection User Default PB