ABB ACS 800 Series, Firmware Manual

Page: 212 / 340

Actual signals and parameters
212
83.05 PASSCODE Sets the passcode for the Adaptive Program protection. The passcode is
needed at activation and inactivation of the protection. See parameter
83.02 .
0 … Passcode. The setting restores to 0 after the protection is activated/inactivated.
Note: When activating, write down the passcode and store it in a safe place.
84 ADAPTIVE
PROGRAM
- selections of the function blocks and their input connections.
- diagnostics
For more information, see the
Adaptive Program Application Guide
[3AFE64527274 (English)].
84.01 STATUS Shows the value of the Adaptive Program status word. The table below shows
the alternative bit states and the corresponding values on the panel display.
84.02 FAULTED PAR Points out the faulted parameter in the Adaptive Program. -
84.05 BLOCK1 Selects the function block for Block Parameter Set 1. See the Adaptive
Program Application Guide [3AFE64527274 (English)].
ABS 11
ADD 10
AND 2
BITWISE 26
COMPARE 16
COUNT 21
DPOT 23
EVENT 20
FILTER 13
MASK-SET 24
MAX 17
MIN 18
MULDIV 12
NO 1
OR 3
PI 14
PI-BAL 15
PI BIPOLAR 25
RAMP 22
SR 5
SWITCH-B 7
SWITCH-I 19
Index Name/Selection Description FbEq
Bit Display Meaning
0 1 Stopped
1 2 Running
2 4 Faulted
3 8 Editing
4 10 Checking
5 20 Pushing
6 40 Popping
8 100 Initialising