Toshiba GR 200 Series, Инструкция по эксплуатации

Страница: 820 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 799 -
TPOS01 function (Function ID: 513001)
510001 8601011DC6
DEV01_P2_INTERLOCK
Operate command
without ILK
† condition
ILK
† condition (“P2”) passed
PLC in DIR operate
513001 800401EE33
510001 7001016D08
TPOS1-P2
Signals from user-PLC logic Output Selection logic in TPOS01
0.1s
0
t
0.6s
0 t
&
&
&
Select condition
‡
1
≥
P2-control command requiring ILK
†check
(PLC connection point #1)
DEV01_P2_COMMAND 513001 800401EE32
P2-control command not requiring
ILK† check
(PLC connection point #2)
Operate command
with ILK
†
condition
For DIR operation
For DIR operation
“TPOS01_P2SL_BO_FLG”
(513001 8A04011DC6)
Select
“Failed”
To BO connection
Select
“success”
To
“Wait for a command”
Figure 4.9-17 Select logic ‘P2-control’ using the PLC function in TPOS01 ††
††
Note: To identify the input and output points of the other TPOS logics, see Table 4.9-3
for PLC#1 and #2, and Table 4.9-10 for the outputs.
†Note: The ILK function provides the operation criteria for “P2-control”.
‡Note: A “select condition” signal is provided from the select condition scheme. For more
information, see Figure 4.9-20.
Output signal to BO
The TPOS01 function, in Figure 4.9-17, can issue a “Select success” signal at the output point
“TPOS01_P2SL_BO_FLG”
1
.
1
Note: The output point “TPOS01_P2SL_BO_FLG” is the same as the signal shown in
Figure 4.9-5.
(ix)
Receiving “Select command P3-control” by the PLC function
Figure 4.9-18 outlines the reception of the select command ‘P3-control’ by the PLC function.