Toshiba GR 200 Series, Инструкция по эксплуатации

Страница: 1528 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 1507 -
1-2. Type using compression terminals and 24-60 Vdc
IED case structure
✓
Type using compression terminals
Type using ring terminals
DC rated voltage
110-250 Vdc
✓
24-60 Vdc
Figure-11.B
illustrates external connection around the power supply module (PWS). During dielectric
voltage testing, three short-wires attached on the PSW shall be carefully handled; follow the below
instructions (1), (2) and (3).
(1) The short-wire between terminal screw No.35 and No.37

Remove the short-wire for undertaking the dielectric voltage test. If the short-wire is not
removed, the IED will be damaged.

After the test, reconnect the short-wire to the original positons.
(2) The short-wire between terminal screw No.38 and FG

Never remove the short-wire. If the short-wire is removed, the IED will be damaged.
(3) The short-wire between terminal screw No.36 and FG

Never remove the short-wire. If the short-wire is removed, the IED will be damaged.
[IO#*]
T*
T*
[IO#*]
T*
[VCT#*]
TC*
(1)
PWS
29
30
31
32
38
DC/DC
(+)
(-)
36
3
1
2
4
FAIL1
9
7
8
10
FAIL2
FG
35
37
y
BIO BIO
(2)
(3)
Figure-11.B A Short-wires, around the PWS, for Type using compression terminals and 24-60Vdc