Toshiba GR 200 Series, Инструкция по эксплуатации

Страница: 284 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 263 -
Setting pick-up operation
The IDMT characteristic is applied when the operation of the UV1 element is required
inversely in accordance with the level of input voltage. The IDMT characteristic curve is
illustrated in Figure 2.15-2 using a value of time multiplier is set for [
UV1-TMS
]. It is followed
to Equation (2.15-1) in conformed in IEC 60255-127
t(G) = TMS × {[
𝑘
1 − (𝑉 𝑉
𝑠
⁄ )
𝑎
] + 𝑐}
(2.15-1)
where,
t = operating time (seconds),
V = energizing voltage (voltage),
Vs = pickup voltage setting (voltage),
TMS = time multiplier setting.
Except for pre-programmed characteristics, the user can have a user-programmable
(original) characteristic curve. The user-programmable (original) curve is obtained when the
constants of k, a, c, as shown in Table 2.15-2, are set, and when
Original
is set for scheme
switch [
UV1-Timer
]. The constants are set with settings [
UV1-k
], [
UV1-a
], and [
UV1-C
].
Figure 2.15-2 IDMT characteristics curves depending on TMS
1.000
10.000
100.000
1000.000
0 0.2 0.4 0.6 0.8 1
Op
erat
in
g
T
im
e
(secs
)
Applied Voltage (x Vs)
Undervoltage Inverse Time Curves
TMS=5
TMS=10
TMS=2
TMS=1