Toshiba GR 200 Series, Инструкция по эксплуатации

Страница: 814 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 793 -
Keying
“Select
command
”
P2control from the local-end
Signal output
Select
decision
Success
Failed
Selection logic
P2 control from the remote-end
P3 control from the remote-end
P1 control from the local-end
P3 control from the local-end
P1 control by the PLC function
P2 control by the PLC function
P3 control by the PLC function
Select stage
Cancel logic
Wait for a command
Cancel command
Wait for a command
Operate logic
Operate command
Cancel logic
Operate logic
P1 control from the remote-end
Figure 4.9-10 Outline of select command for ‘P2-control’
Input signal generated at the local-end
Figure 4.9-11 shows the select logic when a “Select command P2 (Local-P2-Control)” signal is
applied to the TPOS01 function. The signal is provided when the user presses a “Local-P2-
control” key on the IED front panel; the user is not required to take account of mapping.
Input Output Selection logic in TPOS01
Command
“Local-P2-Control”
TPOS1-P2
ILK
† condition (“P2”) passed
ILK
†
bypassing
1≥
ICB_STATE
[ TPOS01-CTRAHMI ]
SBO
TPOS01 function (Function ID: 513001)
SBO
DIR
&
&
1≥
&
0.1s
0
t
0.6s
0
t
Either
“SBO mode” or “DIR mode”
(e.g.,
“ctlmodel” in IEC61850 *
)
“Automatic sequence control function (AQEQ) § ” in progress
ASEQ_MULTI_SEL
Select condition
‡
“TPOS01_P2SL_BO_FLG”
(513001 _ 8A04011DC6)
Select
“Failed”
To BO connection
Select
“success”
To
“Wait for a command”
Select command
with ILK
†
condition
Operate command
with ILK
†
condition
For SBO operation
For DIR operation
Figure 4.9-11 Select P2-control on the front panel in TPOS01 ††
†Note: The ILK function provides the operation criteria for “P2-control”.
§Note: An automatic sequence control (ASEQ) function can provide sequential signals for
automatic control. The TPOS01 operation is blocked for the ASEQ function when