w
w
w
.
i
d
m
e
d
.
f
r
Copyright 2021 - IDMED SAS. All rights reserved. No information or part of this document may be reproduced or transmitted in
any form or by any means, without
the prior written permission of IDMED.
Follow us
Always read the instruction manual before use.
Ref: TOF-QS-V3-EN - Revision : 11/2023
ToFscan and IDMED are registered trademarks owned by IDMED SAS.
A U T O M A T E D M O D E S
The ATP is an automated mode that enables the measurement of light,
medium, and deep block of the patient.
The ATP adapts automatically TOF and PTC measurements depending on the
patient level of neuromuscular block.
To find the ATP, go to the PTC menu and select ATP.
Press and hold the wheel button for 2 seconds to start the mode. There are no
other actions required thereafter.
To stop the ATP, press the wheel button and the device will automatically
interrupt the mode.
2
•
TOF ratio T4/T1 (%)
•
TOF count (x/4)
•
TOF graph.
•
Interval every 15s., 30s., 1min., 2min., 5min.
and 15min
ATP (Automated TOF/PTC)
1
QUICK START
TOF /
(TOF Auto)
Recommended
in PACU
and ICU
Autopilot mode
recommended
in OR
Press the wheel to turn off the auto TOF
