![background image](http://html1.mh-extra.com/html/omron/nj501-1300/nj501-1300_user-manual_742205037.webp)
1-3
1 Introduction to the Motion Control Function Module
NJ-series CPU Unit Motion Control User’s Manual (W507)
1-2 System C
o
n
figu
ratio
n
1
1-2
System Configuration
The MC Function Module receives sensor signal status from devices and control panels. It receives
commands from the motion control instructions that are executed in the user program. It uses both of
these to perform motion control with the Servo Drives and Encoder Input Terminals.
z
Motion Control Configuration
The EtherCAT network configuration and Sysmac Studio are used for the MC Function Module.
•
EtherCAT Network Configuration
The MC Function Module performs control for Servo Drives and Encoder Input Terminals through
the EtherCAT master port that is built into the CPU Unit. The EtherCAT network configuration is
used to perform precise motion control in a fixed period with very little deviation.
•
Sysmac Studio
The Sysmac Studio is connected to the peripheral USB port on the CPU Unit with a commercially
available USB cable. You can also connect it to the built-in EtherNet/IP port on the CPU Unit with
Ethernet cable.
Sysmac Studio
EtherCAT
EtherNet/IP
USB
LAN
Encoder Input Terminal
NJ-series Controller
EtherCAT Network
Configuration
Power Supply Unit
Built-in EtherNet/IP port
Built-in EtherCAT port
Peripheral USB port
Or
Positive limit input
Negative limit input
Immediate stop input
Home proximity input
Home input
External latch input, etc.
CPU Unit
G5-series Servo Drives with Built-in
EtherCAT Communications
Содержание NJ501-1300
