![background image](http://html1.mh-extra.com/html/omron/nj501-1300/nj501-1300_user-manual_742205384.webp)
11 Troubleshooting
11-38
NJ-series CPU Unit Motion Control User’s Manual (W507)
Event name
No Home Input
Event code
742C0000 hex
Meaning
There was no home signal input during the homing operation. Or, a limit signal was detected before there was a home
input.
Source
Motion Control Function Module
Source details
Axis
Detection
timing
During instruc-
tion execution
Error attributes
Level
Minor fault
Recovery
Error reset
Log category
System
Effects
User program
Continues.
Operation
The axis stops with the stop method for the homing execu-
tion status.
System-defined
variables
Variable
Data type
Name
_MC_AX[*].MFaultLvl.Active
BOOL
Axis Minor Fault Occurrence
Cause and
correction
Assumed cause
Correction
Prevention
•
There was no home signal input
during the homing operation.
•
A limit signal was detected before
there was a home input.
Check the home input settings and
wiring and correct them so that the
home signal is input during homing
based on the operation specifications
of the MC_Home instruction. Also, set
the system so that the home signal is
detected before the limit signals.
Set the system so that the home sig-
nal is input during the homing opera-
tion. Make sure that the home signal
is detected before a limit signal. Also
check to make sure there are no wir-
ing problems with the home input.
Attached
information
None
Precautions/
Remarks
None
Event name
No Home Proximity Input
Event code
742D0000 hex
Meaning
There was no home proximity signal input during the homing operation.
Source
Motion Control Function Module
Source details
Axis
Detection
timing
During instruc-
tion execution
Error attributes
Level
Minor fault
Recovery
Error reset
Log category
System
Effects
User program
Continues.
Operation
The axis stops with the stop method for the homing execu-
tion status.
System-defined
variables
Variable
Data type
Name
_MC_AX[*].MFaultLvl.Active
BOOL
Axis Minor Fault Occurrence
Cause and
correction
Assumed cause
Correction
Prevention
There was no home proximity signal
input during the homing operation
when a home proximity input signal
was specified.
Check the home proximity input set-
tings and wiring and correct them so
that the home proximity signal is input
during homing based on the operation
specifications of the MC_Home
instruction.
Set the system so that the home prox-
imity signal is input during the homing
operation. Also check to make sure
there are no wiring problems with the
home proximity input.
Attached
information
None
Precautions/
Remarks
None
Содержание NJ501-1300
