![background image](http://html1.mh-extra.com/html/omron/nj501-1300/nj501-1300_user-manual_742205196.webp)
9 Motion Control Functions
9-14
NJ-series CPU Unit Motion Control User’s Manual (W507)
This section describes the cam tables that are used for cam operation.
9-2-5
Cam Tables
Cam Table Terminology
Term
Description
cam operation
An operation that takes one master axis and one slave axis and follows the cam profile
curve to derive the displacement of the slave axis from the phase of the master axis.
cam profile curve
A curve that shows the relationship between phases and displacements in a cam
operation. Cam profile curves are used in the Cam Editor.
The cam profile curve is created on the Sysmac Studio. You can use the cam profile
curve with a cam data variable after the cam profile curve is downloaded to the CPU
Unit. Use the Synchronization menu command of the Sysmac Studio to download the
project to the CPU Unit.
cam block
You can select a cam curve in this block. It represents the area between the end point
of the previous cam block and the end point of the current cam block.
cam curve
A curve that represents the cam characteristics. You can select a cam curve for each
cam block. The Sysmac Studio calculates the phase widths and displacement widths
from the specified points and creates the actual cam profile curve. You can choose
from different curves, such as straight line, parabolic, and trapecloid.
cam data
Data made up of phases (master axis) and displacements (slave axis) for cam opera-
tion.
cam data variable
A variable that represents the cam data as a structure array.
cam table
A data table that contains cam data. If phase data is not in ascending order the cam
table is treated as an illegal cam table.
cam start point
The first point in the cam data.
cam end point
The last point of valid cam data in the cam data. If the cam end point is less than the
number of cam data, all phases and displacements after the cam end point will be 0.
cam block start point
The start point for a cam block. It is the same as the cam start point at the start of the
cam operation. If the cam profile curve continues, this will be the same as the cam
block end point.
cam block end point
The end point for a cam block. It is the same as the cam end point at the end of the
cam operation. If the cam profile curve continues, this will be the same as the cam
block start point. The cam block end point is defined as (horizontal axis, vertical axis)
= (phase end point, displacement end point).
original cam data
Cam data that is created by dividing up the cam profile curve in the Cam Editor.
program-modified cam
data
The cam data changed by the user program while the CPU Unit is in operation.
master axis
The axis that serves as the input to the cam operation. You can specify either Linear
Mode or Rotary Mode.
slave axis
The axis that serves as the output from the cam operation. You can specify either Lin-
ear Mode or Rotary Mode.
phase
The relative distance on the master axis from the start point of the cam table.
displacement
The relative distance on the slave axis from the master sync start position.
valid cam data
The cam data other than the cam start point and other than data where the phase is 0.
invalid cam data
The cam data other than the cam start point where the phase is 0.
number of valid cam data The number of sets of cam data.
maximum number of
cam data
The maximum number of sets of cam data that the cam table can contain.
cam data index
The number of the cam data that is executed.
Содержание NJ501-1300
