Omron NJ501-1300, Руководство пользователя

Страница: 375 / 432

11-29
11 Troubleshooting
NJ-series CPU Unit Motion Control User’s Manual (W507)
11-2 T
ro
u
b
lesh
oo
tin
g
11
11-2
-2 Error De
scr
iptions
Event name Immediate Stop Input Event code 64490000 hex
Meaning The immediate stop input turned ON.
Source Motion Control Function Module Source details Axis Detection
timing Continuously
Error attributes Level Minor fault Recovery Error reset Log category System
Effects User program Continues. Operation According to the Immediate Stop Input Stop Method.
System-defined
variables Variable Data type Name
_MC_AX[*].MFaultLvl.Active BOOL Axis Minor Fault Occurrence
Cause and
correction Assumed cause Correction Prevention
An immediate stop input signal was
detected. Turn OFF the immediate stop input
signal. (The goal is to detect the immediate
stop input. Preventative measures are
not required.)
The immediate stop input signal is not
connected correctly or the logic set-
ting for the immediate stop input is
wrong. If the error occurs even when the
immediate stop input signal is OFF,
correct the immediate stop signal
connection and logic setting for the
immediate stop input. Make sure that the immediate stop
signal connection and logic setting for
the immediate stop input are correct.
Attached
information None
Precautions/
Remarks You must turn OFF the immediate stop input signal before you reset the error.
Event name Positive Limit Input Detected Event code 644A0000 hex
Meaning The positive limit input turned ON.
Source Motion Control Function Module Source details Axis Detection
timing Continuously
Error attributes Level Minor fault Recovery Error reset Log category System
Effects User program Continues. Operation According to the Limit Input Stop Method.
System-defined
variables Variable Data type Name
_MC_AX[*].MFaultLvl.Active BOOL Axis Minor Fault Occurrence
Cause and
correction Assumed cause Correction Prevention
A positive limit input signal was
detected. Reset the error and move the axis
back in the negative direction before it
exceeds the limit in the positive direc-
tion. Find the reason the limit was
exceeded and make suitable correc-
tions. The goal is to detect the positive limit
input. Preventative measures are not
required. However, be sure not to
exceed the positive limit input when
making programs.
The positive limit input signal is not
connected correctly or the logic set-
ting for the positive limit input is
wrong. If a positive limit input signal does not
occur, correct the connection of the
positive limit signal and the logic set-
ting for the positive limit input. Make sure that the positive limit signal
connection and logic setting for the
positive limit input are correct.
Attached
information None
Precautions/
Remarks None