Oce VarioPrint 2100, Руководство пользователя

Страница: 237 / 308

237
Make a copy or print with the copy card
Make a copy or print with the copy card
Introduction
You can use the Océ VarioPrint
®
2100/2110 in combination with a separate copy
control device. You can use the copy control device as a prepaid credit system or a
post-paid debit system. The prepaid system requires copy cards with credit units.
The post-paid system uses an account number.
Prepaid system
The prepaid system uses a copy card that contains credit units. The print clicks are
subtracted from the credit value on the card each time the system makes a print.
When the card runs out of credits during a print job or copy job, the system stops
printing and displays a message. The user must refill the credits or insert a new card.
Post-paid system
The post-paid system uses an account number that you must enter at the start of a job.
How to make a copy with the copy card
1.
Insert the copy card into the copy control device or enter the account number.
2.
Select a job from the memory or the mailbox. You can also create a copy job with
the green start button (
see ‘Make a copy’ on page 161 ).
3.
Start the job. The job is sent to the job queue.
Note:
If you run out of credits during a job, the system stops the job and asks you to
refill the credits on your card or insert a new card.