Oce VarioPrint 2100, Руководство пользователя

Страница: 151 / 308

151
Types of job settings
[48]
Sort by page and sort by set
You can sort sheets 'By page' or 'By set'.
If you copy single-page documents like forms, sort the documents 'By page'. Sort 'By
set' slows down the print speed within this copy job.
If you print one copy of a multi-page document, select sort 'By set'. Sort 'By page'
slows down the print speed within this copy job.
The following illustrations show documents that are sorted by page.
[48] Output settings for prints
Settings group Setting Description/ function
'Output' 'Destination' This setting indicates the destination of
the prints. The destination can be the
external finisher (if configured), the
stacker (if configured), the booklet
maker (if configured), the upper output
or the finisher.
'Sort' This setting indicates that the prints are
sorted by set or by page. Below this
table, you can find more information
about the sorting of prints.
'Finishing' The setting indicates that the prints are
stapled, not stapled or get a booklet
finishing. You can use staples only when
you select 'Finisher' for the setting
'Destination'.
Note:
When you use 1
staple, the staple position
will depend on the selected
document type.
'Offset stacked' The prints are collated in the finisher
and ejected in sets into one of the output
trays of the finisher. Select 'Offset
stacked' to separate the different sets. If
you set 'Offset stacked' to 'Yes', each
printed set is moved approximately 1
cm to separate the set from the previous
sets.