Oce VarioPrint 2100, Руководство пользователя

Страница: 273 / 308

273
About the staplers
Replace the staple cartridges
About the staplers
The available staplers of the Océ VarioPrint
®
2100/2110
Information for operators, key operators
The following staplers are available on your Océ VarioPrint
®
2100/2110.
■
2 on-line staplers in the finisher (standard)
■
1 off-line stapler (if your Océ VarioPrint
®
2100/2110 is equipped with the
optional off-line stapler)
■
2 on-line staplers in the booklet maker (if your Océ VarioPrint
®
2100/2110 is
equipped with the optional booklet maker)
■
another on-line stapler if your Océ VarioPrint
®
2100/2110 is equipped with the
optional Océ stacker/stapler.
Each stapler can staple a maximum of 80 sheets or a paper stack of up to 8.25 mm.
The number of 80 sheets was defined for Océ Red Label paper of 80 g/m
2
(20 lb
bond).
When a stapler run out of staples, the stapler icon in the warning section on the
operator panel becomes orange. The highlighted number below the icon indicates
which stapler is empty.
[79]
If a stapler runs empty when you start a job or during a job, a warning message
appears. When a job stops because of a lack of staples, you can do the following.
■
Refill the staplers.
[79] Locations of the staplers
Number Stapler
1 Below the top cover of the finisher, at the back of the printer
2 Behind the front door of the finisher
3 (optional off-line
stapler) Behind the front door of the finisher
4 (optional booklet
maker) Inside the booklet maker - front side
5 (optional booklet
maker) Inside the booklet maker - back side
6 (optional
stacker/stapler Inside the stacker/stapler - front side