Oce VarioPrint 2100, Руководство пользователя

Страница: 173 / 308

173
Create a booklet
Booklets
Create a booklet
Introduction
Task for operators
If your Océ VarioPrint
®
2100/2110 has the optional integrated booklet maker, you
can use the 'Copy' function of the Océ VarioPrint
®
2100/2110 to create a sorted,
folded and stapled booklet. You can put the originals in the automatic document
feeder or on the glass plate.
You can also use the set-build function to create a booklet
Combine subsets into one
document on page 164 .
Note:
When you use A4 / Letter for the booklet maker, make sure that you use A4
SEF or Letter SEF. The booklet maker can only process paper that is fed over the
short edge (
).
You can use the 'Booklet' template. This template is always available, even if your
Océ VarioPrint
®
2100/2110 does not have the integrated booklet maker. If you put
A4 paper into the automatic document feeder and one of the paper trays contains A3
paper, the following settings are set automatically.
■
The 'Print' setting in the 'Basic settings' section is set to '2-sided'
■
The 'Layout' setting in the 'Print' section is set to 'Booklet'.
If your original is a booklet, you must set the 'Layout' setting in the 'Print' section
to 'Normal'
Note: You can select A4 for the 'Paper' setting instead of A3. The 'Zoom' setting is
then set to 71% if you loaded A4 paper over the short edge feed (SEF) into one of
the paper trays.
Before you begin
■
Remove all staples from your originals.
■
Remove the paper clips.
■
Make sure that the originals in the automatic document feeder have the same size.
■
Make sure that the originals are not curled.
Note:
If your Océ VarioPrint
®
2100/2110 does not have the optional integrated
booklet maker, you can still create a booklet layout for your document. The system
then shuffles the originals. For example, the pages 1 and 4 are printed on one side of