Oce VarioPrint 2100, Руководство пользователя

Страница: 96 / 308

96 Chapter 4 Adapt the system
Control the backlight of the screen
Control the backlight of the screen
Introduction
At the rear side of the operator panel you find the 2 keys to adjust the backlight of
the screen. You can adjust the backlight in the range 0 to 7. Default value is 4.
The keys are not repetitive (no repeat function).
The system keeps the backlight setting in the memory. A restart of the system has no
influence on this setting.
Before you begin
Wait until the machine has passed the initialisation phase. You will see the basic
screen settings when the initialisation phase is completed and the Océ VarioPrint
®
2100/2110 is in Stand-by mode.
The figure below shows you where to find the keys for the backlight control. The
keys to operate the backlight control are located at the rear side of the monitor where
the arrow marks the position.
Illustration
[36]
[36] The backlight control
How to control the backlight of the screen
1.
Press the right backlight key.
The brightness level increases one step.
2.
Press the right key again until you reach the needed level of brightness.
3.
If you want to decrease the brightness, follow steps 1 and 2 but use the left backlight
key instead.