Oce VarioPrint 2100, Руководство пользователя

Страница: 88 / 308

88 Chapter 3 Get to know the Océ VarioPrint
®
2100/2110
Edit a job in the 'Mailbox' or 'Memory'
Edit a job in the 'Mailbox' or 'Memory'
Introduction
When you start a job from the 'Mailbox' or 'Memory', a new job is created in the job
queue. This new job is a copy of the job in the mailbox or memory. To edit the
settings of a job in the 'Mailbox' or 'Memory', you must select the job and press the
'Edit...' key. You can then edit a copy of the selected job. This edited copy is sent to
the job queue. The changes you make are not applied to the job in the 'Mailbox' or
'Memory'. The changes are only applied to the new job in the job queue.
Note:
If you want to save changed settings for jobs in the 'Mailbox' or 'Memory',
you can use the 'Save settings?' function ( see ‘Save the settings of a print job’ on
page 91 ).
Options
You can change the following settings for the jobs in the 'Mailbox' or 'Memory'.
■
Number of prints
■
1-sided or 2-sided
■
'Sort' (by set or by page)
■
Finishing, which is a booklet layout or the number of staples
■
'Offset stacked'
■
'Destination'
■
'Document type'
You can change the 'Document type' only for the position of a single staple
(landscape and portrait). A change in the layout is not applied, but the feedback
can suggest a rotation.
■
The covers for your job (no covers, front and back covers or a front cover only)
■
'Margin shift'
■
'Type', but only for jobs in the 'Mailbox'. You cannot change the 'Type' setting for
jobs in the 'Memory'. The 'Type' setting is always set to 'Paper' for jobs in the
'Memory'.
Note:
When you select more than one job in the 'Mailbox' or 'Memory', the 'Edit...'
key is disabled. You cannot edit more than one job at a time.
Fixed settings
You cannot edit the following settings at the operator panel, because changes in the
values can cause start contradictions for jobs in the 'Memory' and the 'Mailbox'.
■
'Paper'
■
'Layout'
■
'Shift to centre'
■
'Zoom'
■
'Type' for jobs in the 'Memory'.