Oce VarioPrint 2100, Руководство пользователя

Страница: 288 / 308

288 Chapter 11 Error handling
About the staple jams
About the staple jams
Introduction
Information for operators, key operators
All the staplers can staple sets of 80 sheets of paper and sets of a maximum of 8.25
mm. The number of 80 sheets was defined with Océ Red Label paper of 80 g/m
2
(20 lb bond). When a staple error occurs, the operator panel shows a message.
Follow the instructions on the screen to correct the problem.
General information
When a stapler error occurs, replace the stapler cartridge ( see ‘Replace the stapler
cartridges 1 and 2 (standard on-line staplers)’ on page 275 ).
Remove any loose staples. Make sure that no staples fall into the Océ VarioPrint
®
2100/2110. Keep the stapler cartridge which caused the problems. Give the stapler
cartridge to the Océ service technician.
Note:
After you correct the problem, the situation can occur that the stapler does
not staple the next two or three sets.