Oce VarioPrint 2100, Руководство пользователя

Страница: 163 / 308

163
Change the settings for a copy job
Change the settings for a copy job
Introduction
After you select a template, you can change all the settings for your copy job in the
Job editor.
How to define the settings for a new job
1.
Automatic document feeder: Put the originals face down and in readable form into
the automatic document feeder. Adjust the original guides to the original paper size.
Glass plate: Put the originals on the glass plate.
2.
Select a template.
3.
The Job editor opens with the 'Basic settings' menu. All settings are set to the values
defined for this template.
Note: When you put your originals into the automatic document feeder, the original
size, original sheet orientation and the original document type are selected
automatically (Only for A4 and Letter Standard. Other formats can only be fed in
one feed direction).
The print size and document type are also automatically selected and adapted to the
original settings.
4.
To change the settings for the original document, press the key for 'Original' and go
through the 4 menus at the right side of the screen ('Source', 'Sheet', 'Layout' and
'Image').
5.
To change the settings for the print, press the key for 'Print' and go from top to bottom
through the 6 menus at the right side of the screen ('Target', 'Output', 'Paper',
'Covers', 'Layout' and 'Image').
6.
Set the number of prints with the numeric keys.
Note: You can set the number of prints at all times during the job definition. The
print feedback area displays the number of prints.