Fresenius Medical Care DIASAFE 2008 K, Руководство оператора

Страница: 59 / 240

Chapter 3—Setting Treatment Parameters
2008K Hemodialysis Machine Operator’s Manual Rev P 59
Entering a Parameter
Treatment parameters can be entered quickly and easily using the 2008K keypad. All
editable treatment data are displayed in yellow rectangular buttons in the treatment screens.
To change a treatment parameter in any screen, highlight the parameter to change by touching
the corresponding button on the touch screen. The selected button changes to a brighter
shade of yellow when highlighted. Enter the new value using the numbers on the data entry
keypad or
 / 
(u
p or down) keys located below the screen on the control panel. After
entering the new parameter value, press the CONFIRM key to save it in the 2008K
hemodialysis machine’s memory. The following example illustrates this procedure.
To set a treatment parameter:
Figure 26 – Entering Parameters
An operator may attempt to enter data that is invalid. Some examples are:

Attempting to enter a time of 1:80. The time format is hours:minutes. Anything over
59 minutes is not valid.
2) Use the
number or arrow
keys to input the
desired value.
If an incorrect value was entered, press Escape
to reset the parameter to its original value. (This
only works before
CONFIRM is pressed).
1) Begin by selecting
any treatment
parameter button.
We’ll use UF Goal in
this example. The
background color turns
brighter yellow.
3) After entering
the value, press
CONFIRM to
enter the value.