Fresenius Medical Care DIASAFE 2008 K, Руководство оператора

Страница: 58 / 240

Chapter 3—Setting Treatment Parameters
58 2008K Hemodialysis Machine Operator’s Manual Rev P
New Treatment Key
When the 2008K hemodialysis machine is first turned on in preparation for daily operation
(after a long power down), all treatment parameters revert to their default settings. This can
also be accomplished by pressing the
New TX (New Treatment) key when in Dialysis Mode.
The New TX key allows the operator to reset patient treatment parameters to their default
settings without interrupting the power to the machine. This must be done in preparing the
2008K hemodialysis machine for all subsequent treatments after the first of the day.
After pressing the New TX key or after a long power down:

All treatment data (blood pressure, Kt/V) are deleted. The treatment summary
information is moved to the previous record in the “Trends” screen.

The RTD counter is reset to zero

All heparin treatment parameters are reset to zero

SVS profile is reset to None

UF treatment parameters are reset as follows:
UF profile is reset to None
UF Removed is reset to zero
UF Goal = 3000
UF Time = 3:00
UF Rate = 1000

The “Dialysate” screen is displayed and the concentrate will need to be confirmed
To activate the New Treatment Option:
Figure 25 – New TX key
1) Press
New TX
2) Press
CONFIRM