TIME=HH:MM:SS AM
OPEN(change) - CLOSE (accept)
HH is the hour of the day, e.g., 09; MM is the minutes, e.g., 12; SS is
the seconds, e.g., 43; AM represents after midnight and PM
represents after noontime.
4. Press
OPEN
DOOR
to change the HH, MM, and SS each in turn until
the desired setting is displayed. Press
CLOSE
DOOR
each time to
move the cursor to the next field. After the AM/PM is updated, the
current date is displayed.
5. After the desired date and time settings have been obtained,
simultaneously press
START
and
CANCEL
to exit the month/time
program.
PM Log
1. Enter the edit mode by pressing
START
and
CANCEL
at the same
time. The system displays the current date information. Press
CANCEL
to display the time information. Press
CANCEL
again to
display the PM Log menu. The display looks like the following
example:
P.M. N: NEXT PM XXX
OPEN (reset) - CANCEL (next)
For STERRAD 100 S Systems press OPEN DOOR and START to enter the
edit mode. Then proceed with step 1 above.
4
4
Note:
The cursor flashes on the N/Y field. The NEXT PM field
displays the total remaining cycles before the system
stops running cycles.
2. Press
OPEN
to change the N default to Y (indicating maintenance has
been completed). Verify that the
NEXT PM
field resets to the total
allowable cycles (750) between maintenance intervals.
3. Press
CANCEL
(display moves to date), then press
START
and
CANCEL
at the same time. The system display returns to the ready
state and prints the Maintenance Log.
System Acceptance
The system must pass the product certification and biological
acceptance procedure after installation. Select product certification
procedures to go to the final steps needed to complete the installation .
The biological acceptance is performed by the field service engineer and
the system specialist prior to certifying the system for use.
Preparing The System For Use
System Installation
ASP Service Guide rev. D
STERRAD® 100 Sterilizer
11-15
Содержание STERRAD 100
