5 - 47
CHAS
HANDLEBAR
7. Install:
• Throttle cables
1
To tube guide
2
.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
8. Install:
• Throttle cable cap
1
• Screw (throttle cable cap)
2
WARNING
After tightening the screws, check that the
throttle grip
3
moves smoothly. If it does
not, retighten the bolts for adjustment.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
9. Install:
• Grip cap cover
1
• Cover (throttle cable cap)
2
10. Install:
• Brake master cylinder
1
• Brake master cylinder bracket
2
• Bolt (brake master cylinder bracket)
3
NOTE:
• Install the bracket so that the arrow mark
a
faces upward.
• First tighten the bolt on the upper side of the
brake master cylinder bracket, and then
tighten the bolt on the lower side.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
