4 - 18
ENG
CARBURETOR
11. Install:
• Needle valve
1
• Float
2
• Float pin
3
NOTE:
• After installing the needle valve to the float,
install them to the carburetor.
• Check the float for smooth movement.
12. Install:
• Pilot screw
1
• Spring
2
• Washer
3
• O-ring
4
* Except for USA and CDN
Note the following installation points:
• Turn in the pilot screw until it is lightly
seated.
• Turn out the pilot screw by the number of
turns recorded before removing.
Pilot screw (example):
1-7/8 turns out
* 2-1/8 turns out
13. Install:
• O-ring
• Leak jet
1
• Float chamber
2
• Bolt (float chamber)
3
• Cable holder (throttle stop screw cable)
4
• Hose holder (carburetor breather hose)
5
14. Install:
• Diaphragm (accelerator pump)
1
• Spring
2
• O-ring
3
• Accelerator pump cover
4
• Hose holder (drain hose)
5
• Screw (accelerator pump cover)
6
NOTE:
Install the diaphragm (accelerator pump) with
its mark
a
facing the spring.