3 - 27
INSP
ADJ
REAR BRAKE PAD INSPECTION AND REPLACEMENT
3. Inspect:
• Brake fluid level
Refer to “BRAKE FLUID LEVEL INSPEC-
TION” section.
• Install the pad pin plug
0
.
T
R
.
.
Pad pin plug:
3 Nm (0.3 m • kg, 2.2 ft • lb)
4. Check:
• Brake lever operation
A softy or spongy feeling
→
Bleed brake
system.
Refer to “BRAKE SYSTEM AIR BLEED-
ING” section.
REAR BRAKE PAD INSPECTION AND
REPLACEMENT
1. Inspect:
• Brake pad thickness
a
Out of specification
→
Replace as a set.
Brake pad thickness:
6.4 mm (0.25 in)
<Limit>: 1.0 mm (0.04 in)
2. Replace:
• Brake pad
Brake pad replacement steps:
• Remove the protector
1
and pad pin plug
2
.
• Loosen the pad pin
3
.
• Remove the rear wheel
4
and brake cali-
per
5
.
Refer to “FRONT WHEEL AND REAR
WHEEL” section in the CHAPTER 5.
