background image

7 - 7

T U N

Jet needle adjustment

The jet needle is adjusted by changing it.

The tapered sections of all jet needles have
the same starting positions, but the needles
are available with different straight-portion
diameters.

<Example>
OBEPQ - 4

Clip position

Diameter 

a

 of straight portion

Standard jet needle

OBEPQ

Effects of changing the jet needle (refer-
ence)

(Diameter of the straight portion)
Changing the diameter of the straight portion
adjusts the air-fuel mixture when the throttle is
1/8 to 1/4 open.

È

Idle

É

Fully open

Relationship with throttle opening

The flow of the fuel through the carburetor
main system is controlled by the main jet and
then, it is further regulated by the area
between the main nozzle and the jet needle.
The fuel flow relates to the diameter of the
straight portion of the jet needle with the throt-
tle 1/8 to 1/4 open and relates to the clip posi-
tion with the throttle 1/8 to 3/4 open.
Therefore, the fuel flow is balanced at each
stage of throttle opening by the combination of
the jet needle straight portion diameter and clip
position.

+10 %

Q

–10 %

P

R

1/4

1/2

3/4

 

È

É

SETTING

Summary of Contents for YZ250F(W)





































































































































































































































































































































































































































































































































































































































































































Reviews: