Ryobi Roboyagi, Original Instructions Manual

Page: 14 / 444

ENGLISH
12
immediate vicinity.
■
The charging station must be positioned with
enough free space.
■
Protect the charging station from water sprinkler
systems.
■
Protect the charging station from direct sunlight.
■
Do not put the charging station in con fi ned spaces
in the work area. This can make it dif fi cult for the
product to fi nd the charging station.
■
The charging station must not be positioned in a
way that its charging pad is bent.
■
The charging station must not be placed on an
de
fi ned obstacle as this limits the optimal operation
of the boundary wire.
■
Position the charging station in a suitable spot.
■
Mount the charging station to the ground using
the supplied charging station screws. Ensure the
screws are securely tightened all the way down in
the countersink. If the charging station is placed
against a wall, it is best to wait before securing
the charging station to the ground until after all the
wires have been connected.
CONNECTING THE POWER SUPPLY
■
The transformer must be protected from rain and
direct sunlight.
■
If the transformer is connected to an outdoor power
outlet, ensure the power outlet is designed for
outdoor use.
WARNING
The transformer cable must not, under any
circumstances, be shortened or extended.
■
Make sure the transformer cable is laid along the
ground and secured with pegs. The cable must lay
close to the ground so as not to be cut before the
grass roots have grown over it.
WARNING
Place the transformer cable so that the blades can
never come in contact with the cable.
■
The transformer must be placed in a well-ventilated
area. Do not expose to direct sunlight.
■
Do not, under any circumstances, mount the
transformer at a height where there is a risk of it
being submerged in water. The transformer must
not be placed on the ground.
■
Never connect the transformer to the power outlet if
the plug or cord is damaged. Damaged or entangled
cord increases the risk of electric shock.
■
Connect the transformer’s power cable to a 100 -
240 V mains.
CHARGING THE MOWER
As soon as the charging station is connected, it is
possible to charge the mower.
■
Turn on the master switch, which is located at the
underside of the mower.
■
Dock the mower to the charging station.
WARNING
Do not use the product until the installation is
complete.
USING THE CONTROL PANEL
1
2
3
4
5
The product settings are managed through the control
panel.
1. Back button
This button is used to return the user to a previous
menu screen.