manualshive.com logo in svg

Renesas SH7706 Series, Hardware Manual

The Renesas SH7706 Series is a high-performance microcontroller designed for a wide range of applications. To maximize the potential of this product, it is crucial to have access to its comprehensive "Hardware Manual". This manual can be easily downloaded for free from manualshive.com, providing users with detailed instructions and specifications for optimal usage.

Share
Download
background image

Rev. 5.00  May 29, 2006  page xxxiii of xlviii

Section 20   D/A Converter (DAC)

.................................................................................. 549

20.1

Feature .............................................................................................................................. 549

20.2

Input/Output Pin................................................................................................................ 550

20.3

Register Description.......................................................................................................... 550
20.3.1 D/A Data Registers 0 and 1 (DADR0 and DADR1)............................................ 550
20.3.2 D/A Control Register (DACR) ............................................................................ 550

20.4

Operation .......................................................................................................................... 552

Section 21   User Debugging Interface (H-UDI)

.......................................................... 553

21.1

Feature .............................................................................................................................. 554

21.2

Input/Output Pin................................................................................................................ 554

21.3

Register Description.......................................................................................................... 555
21.3.1 Bypass Register (SDBPR) ................................................................................... 555
21.3.2 Instruction Register (SDIR) ................................................................................. 555
21.3.3 Boundary Scan Register (SDBSR)....................................................................... 556

21.4

H-UDI Operations............................................................................................................. 561
21.4.1 TAP Controller .................................................................................................... 561
21.4.2 Reset Configuration ............................................................................................. 562
21.4.3 H-UDI Reset ........................................................................................................ 563
21.4.4 H-UDI Interrupt ................................................................................................... 563
21.4.5 Bypass.................................................................................................................. 563
21.4.6 Using H-UDI to Recover from Sleep Mode ........................................................ 563

21.5

Boundary Scan .................................................................................................................. 564
21.5.1 Supported Instructions ......................................................................................... 564
21.5.2 Notes for Boundary Scan ..................................................................................... 565

21.6

Usage Note........................................................................................................................ 565

21.7

Advanced User Debugger (AUD) ..................................................................................... 565

Section 22   Power-Down Modes

...................................................................................... 567

22.1

Input/Output Pin................................................................................................................ 569

22.2

Register Description.......................................................................................................... 569
22.2.1 Standby Control Register (STBCR)..................................................................... 569
22.2.2 Standby Control Register 2 (STBCR2)................................................................ 571

22.3

Operation .......................................................................................................................... 573
22.3.1 Sleep Mode .......................................................................................................... 573
22.3.2 Software Standby Mode....................................................................................... 574
22.3.3 Module Standby Function.................................................................................... 576
22.3.4 Timing of STATUS Pin Changes ........................................................................ 578
22.3.5 Hardware Standby Function ................................................................................ 582

Summary of Contents for SH7706 Series














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SH7706 Series

Magma PE6R4-I Quick Installation Manual preview
PE6R4-I
Brand: Magma Pages: 2
Salus PL07 Instruction Manual preview
PL07
Brand: Salus Pages: 16
VMIC VMICPCI-7755 Product Manual preview
VMICPCI-7755
Brand: VMIC Pages: 126
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Brand: Opengear Pages: 2
RuggedCom RUGGEDMAX WIN7000 Installation Manual preview
RUGGEDMAX WIN7000
Brand: RuggedCom Pages: 42
NEC Thin Client US310e Getting Started preview
Thin Client US310e
Brand: NEC Pages: 6
Medel RONDO 3 Quick Manual preview
RONDO 3
Brand: Medel Pages: 28
ZALMAN ZM-2HC2 User Manual preview
ZM-2HC2
Brand: ZALMAN Pages: 8
Alcatel-Lucent 9364 Installation And Commissioning Manual preview
9364
Brand: Alcatel-Lucent Pages: 60
iesy Open Standard Module RPX30 EVA-MI V1 Quick Start Manual preview
Open Standard Module RPX30 EVA-MI V1
Brand: iesy Pages: 9
EZCast Pro Dongle II D10 Repair Manual preview
Dongle II D10
Brand: EZCast Pro Pages: 4
ekwb EK-FC R9-295X2 Installation And Mounting Manual preview
EK-FC R9-295X2
Brand: ekwb Pages: 2
netsys NVF-2400S User Manual preview
NVF-2400S
Brand: netsys Pages: 164
Spirent A2-400 Installation Instructions Manual preview
A2-400
Brand: Spirent Pages: 22
Tripp Lite SmartRack SR42UBEXPKD Assembly Instructions Manual preview
SmartRack SR42UBEXPKD
Brand: Tripp Lite Pages: 8
Valcom VIP-814 Installation Manual preview
VIP-814
Brand: Valcom Pages: 3
ICP DAS USA ET-7017-10 Quick Start Manual preview
ET-7017-10
Brand: ICP DAS USA Pages: 8
CAME ZG6 Installation Manual preview
ZG6
Brand: CAME Pages: 14

Brands by name

Popular brands

Load more brands