manualshive.com logo in svg

Renesas SH7706 Series, Hardware Manual

The Renesas SH7706 Series is a high-performance microcontroller designed for a wide range of applications. To maximize the potential of this product, it is crucial to have access to its comprehensive "Hardware Manual". This manual can be easily downloaded for free from manualshive.com, providing users with detailed instructions and specifications for optimal usage.

Share
Download
background image

Rev. 5.00  May 29, 2006  page xliii of xlviii

Figure 24.37 Synchronous DRAM Auto-Refresh Timing (TRAS = 1, TPC = 1) ..................... 645
Figure 24.38 Synchronous DRAM Self-Refresh Cycle (TPC 

=

 0) ........................................... 645

Figure 24.39 Synchronous DRAM Mode Register Write Cycle ............................................... 646
Figure 24.40 PCMCIA Memory Bus Cycle (TED = 0, TEH = 0, No Wait) ............................. 647
Figure 24.41 PCMCIA Memory Bus Cycle (TED = 2, TEH = 1, One Wait, External Wait) ... 648
Figure 24.42 PCMCIA Memory Bus Cycle (Burst Read, TED = 0, TEH = 0, No Wait) ......... 649
Figure 24.43 PCMCIA Memory Bus Cycle

(Burst Read, TED = 1, TEH = 1, Two Waits, Burst Pitch = 3)............................ 650

Figure 24.44 PCMCIA I/O Bus Cycle (TED = 0, TEH = 0, No Wait) ..................................... 651
Figure 24.45 PCMCIA I/O Bus Cycle (TED = 2, TEH = 1, One Wait, External Wait) ........... 652
Figure 24.46 PCMCIA I/O Bus Cycle (TED = 1, TEH = 1, One Wait, Bus Sizing) ................ 653
Figure 24.47 TCLK Input Timing............................................................................................. 655
Figure 24.48 TCLK Clock Input Timing .................................................................................. 655
Figure 24.49 Oscillation Settling Time at RTC Crystal Oscillator Power-on ........................... 655
Figure 24.50 SCK Input Clock Timing ..................................................................................... 655
Figure 24.51 SCI I/O Timing in Clock Synchronous Mode...................................................... 656
Figure 24.52 I/O Port Timing.................................................................................................... 656
Figure 24.53

DREQ

 Input Timing ............................................................................................ 657

Figure 24.54 DRAK Output Timing ......................................................................................... 657
Figure 24.55 TCK Input Timing ............................................................................................... 658
Figure 24.56 TRST Input Timing (Reset Hold) ........................................................................ 659
Figure 24.57 H-UDI Data Transfer Timing .............................................................................. 659
Figure 24.58

ASEMD0

 Input Timing ....................................................................................... 659

Figure 24.59 AUD Timing ........................................................................................................ 660
Figure 24.60 External Trigger Input Timing ............................................................................. 661
Figure 24.61 A/D Conversion Timing ...................................................................................... 661
Figure 24.62 Output Load Circuit ............................................................................................. 662
Figure 24.63 Load Capacitance vs. Delay Time ....................................................................... 663

Appendix
Figure D.1

Package Dimensions (FP-176C) .......................................................................... 693

Figure D.2

Package Dimensions (TBP-208A) ....................................................................... 694

Summary of Contents for SH7706 Series














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SH7706 Series

3Com 3CRWB6096 Quick Start Manual preview
3CRWB6096
Brand: 3Com Pages: 8
Accuphase AD-60 Instruction Manual preview
AD-60
Brand: Accuphase Pages: 2
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Brand: ADTRAN Pages: 2
Acrosser Technology AMB-VDX3H1 Series Quick Start Manual preview
AMB-VDX3H1 Series
Brand: Acrosser Technology Pages: 4
Renesas F-ZTAT H8/3048 Series User Manual preview
F-ZTAT H8/3048 Series
Brand: Renesas Pages: 34
Supermicro SAS-827HD User Manual preview
SAS-827HD
Brand: Supermicro Pages: 16
National Instruments Fieldpoint cFP-RTD-124 Operating Instructions Manual preview
Fieldpoint cFP-RTD-124
Brand: National Instruments Pages: 15
Datasat DDR-16 AES67 Installation And Operating Manual preview
DDR-16 AES67
Brand: Datasat Pages: 24
Galaxy Hunter Series Quick Start Manual preview
Hunter Series
Brand: Galaxy Pages: 30
EMS 2000 IDU Series User Manual preview
2000 IDU Series
Brand: EMS Pages: 52
Hauppauge WinTV-DVB Installation And Reference Manual preview
WinTV-DVB
Brand: Hauppauge Pages: 62
TDK HHM Series HHM2409 Specifications preview
HHM Series HHM2409
Brand: TDK Pages: 2
Kontron MSP8040 Series User Manual preview
MSP8040 Series
Brand: Kontron Pages: 32
Intel 80960KB Manual preview
80960KB
Brand: Intel Pages: 44
Kontron ADA-SDVO-PEG16 User Manual preview
ADA-SDVO-PEG16
Brand: Kontron Pages: 14
ADLINK Technology aTCA-9710 User Manual preview
aTCA-9710
Brand: ADLINK Technology Pages: 86
ELSA GLoria-L User Manual preview
GLoria-L
Brand: ELSA Pages: 60
Helmholz 700-160-3EN02 Quick Start Manual preview
700-160-3EN02
Brand: Helmholz Pages: 14

Brands by name

Popular brands

Load more brands