manualshive.com logo in svg

Renesas SH7706 Series, Hardware Manual

The Renesas SH7706 Series is a high-performance microcontroller designed for a wide range of applications. To maximize the potential of this product, it is crucial to have access to its comprehensive "Hardware Manual". This manual can be easily downloaded for free from manualshive.com, providing users with detailed instructions and specifications for optimal usage.

Share
Download
background image

Rev. 5.00  May 29, 2006  page xxviii of xlviii

9.6.2

Example of DMA Transfer between External Memory and SCIF Transmitter
(Indirect Address on) ........................................................................................... 299

9.7

Cautions ............................................................................................................................ 301

Section 10   Clock Pulse Generator (CPG)

..................................................................... 303

10.1

Feature .............................................................................................................................. 303

10.2

Input/Output Pin................................................................................................................ 306

10.3

Clock Operating Modes .................................................................................................... 306

10.4

Register Description.......................................................................................................... 310
10.4.1 Frequency Control Register (FRQCR)................................................................. 310

10.5

Operation .......................................................................................................................... 312
10.5.1 Changing the Multiplication Rate ........................................................................ 312
10.5.2 Changing the Division Ratio................................................................................ 312

10.6

Usage Note........................................................................................................................ 313

Section 11   Watchdog Timer (WDT)

.............................................................................. 315

11.1

Feature .............................................................................................................................. 315

11.2

Register Description.......................................................................................................... 316
11.2.1 Watchdog Timer Counter (WTCNT)................................................................... 316
11.2.2 Watchdog Timer Control/Status Register (WTCSR)........................................... 316
11.2.3 Notes on Register Access..................................................................................... 318

11.3

Operation .......................................................................................................................... 319
11.3.1 Canceling Software Standbys .............................................................................. 319
11.3.2 Changing the Frequency ...................................................................................... 320
11.3.3 Using Watchdog Timer Mode.............................................................................. 320
11.3.4 Using Interval Timer Mode ................................................................................. 321

Section 12   Timer Unit (TMU)

......................................................................................... 323

12.1

Feature .............................................................................................................................. 323

12.2

Input/Output Pin................................................................................................................ 325

12.3

Register Description.......................................................................................................... 325
12.3.1 Timer Output Control Register (TOCR) .............................................................. 326
12.3.2 Timer Start Register (TSTR)................................................................................ 327
12.3.3 Timer Control Registers 0 to 2 (TCR_0 to TCR_2)............................................. 328
12.3.4 Timer Constant Registers 0 to 2 (TCOR_0 to TCOR_2)..................................... 331
12.3.5 Timer Counters 0 to 2 (TCNT_0 to TCNT_2)..................................................... 332
12.3.6 Input Capture Register 2 (TCPR_2)..................................................................... 332

12.4

Operation .......................................................................................................................... 332
12.4.1 Counter Operation................................................................................................ 333
12.4.2 Input Capture Function ........................................................................................ 336

12.5

Interrupts ........................................................................................................................... 337

Summary of Contents for SH7706 Series














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SH7706 Series

Omnia 11 Installation And Operation Manual preview
11
Brand: Omnia Pages: 102
Lattice Semiconductor ECP5 Versa Quick Start Manual preview
ECP5 Versa
Brand: Lattice Semiconductor Pages: 15
SAF Phoenix G2 IDU Quick Start Manual preview
Phoenix G2 IDU
Brand: SAF Pages: 30
Datasat AP25 Installation And Operating Manual preview
AP25
Brand: Datasat Pages: 170
Vonets MINI300 Quick Setting Manual preview
MINI300
Brand: Vonets Pages: 8
Freescale Semiconductor MCF54455 Reference Manual preview
MCF54455
Brand: Freescale Semiconductor Pages: 921
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Brand: C&H Pages: 32
RAIDAGE DAGE312UTL-NAS User Manual preview
DAGE312UTL-NAS
Brand: RAIDAGE Pages: 60
ebm-papst R3G175-AF01-02 Operating Instructions Manual preview
R3G175-AF01-02
Brand: ebm-papst Pages: 11
ETAS BR-XETK-S4.0 User Manual preview
BR-XETK-S4.0
Brand: ETAS Pages: 82
Promise Technology FastTrak TX4000 User Manual preview
FastTrak TX4000
Brand: Promise Technology Pages: 76
XtendLan XL-HCW224C User Manual preview
XL-HCW224C
Brand: XtendLan Pages: 52
ebm-papst W3G710-NK67-01 Operating Instructions Manual preview
W3G710-NK67-01
Brand: ebm-papst Pages: 13
Comway 4G DTU Configuration Instructions preview
4G DTU
Brand: Comway Pages: 20
Lattice Semiconductor sysCLOCK ECP5 Usage Manual preview
sysCLOCK ECP5
Brand: Lattice Semiconductor Pages: 43
Paradyne ACCULINK 3161 CSU Quick Reference Manual preview
ACCULINK 3161 CSU
Brand: Paradyne Pages: 19
CopperOptics 150-1342-01 Manual preview
150-1342-01
Brand: CopperOptics Pages: 12
Cypress Semiconductor CY8C24223A Specification Sheet preview
CY8C24223A
Brand: Cypress Semiconductor Pages: 31

Brands by name

Popular brands

Load more brands