manualshive.com logo in svg

Renesas SH7706 Series, Hardware Manual

The Renesas SH7706 Series is a high-performance microcontroller designed for a wide range of applications. To maximize the potential of this product, it is crucial to have access to its comprehensive "Hardware Manual". This manual can be easily downloaded for free from manualshive.com, providing users with detailed instructions and specifications for optimal usage.

Share
Download
background image

Rev. 5.00  May 29, 2006  page xxxii of xlviii

18.5.2 Port E Data Register (PEDR)............................................................................... 516

18.6

Port F................................................................................................................................. 517
18.6.1 Register Description............................................................................................. 517
18.6.2 Port F Data Register (PFDR) ............................................................................... 518

18.7

Port G ................................................................................................................................ 519
18.7.1 Register Description............................................................................................. 519
18.7.2 Port G Data Register (PGDR) .............................................................................. 520

18.8

Port H ................................................................................................................................ 521
18.8.1 Register Description............................................................................................. 521
18.8.2 Port H Data Register (PHDR) .............................................................................. 522

18.9

Port J ................................................................................................................................. 523
18.9.1 Register Description............................................................................................. 523
18.9.2 Port J Data Register (PJDR)................................................................................. 524

18.10 SC Port .............................................................................................................................. 525

18.10.1 Register Description............................................................................................. 525
18.10.2 SC Port Data Register (SCPDR) .......................................................................... 526

Section 19   A/D Converter (ADC)

.................................................................................. 529

19.1

Features ............................................................................................................................. 529

19.2

Input/Output Pin................................................................................................................ 531

19.3

Register Description.......................................................................................................... 531
19.3.1 A/D Data Registers A to D (ADDRA to ADDRD).............................................. 532
19.3.2 A/D Control/Status Register (ADCSR) ............................................................... 533
19.3.3 A/D Control Register (ADCR) ............................................................................ 536

19.4

Bus Master Interface ......................................................................................................... 536

19.5

Access Size of A/D Data Register..................................................................................... 538
19.5.1 Word Access ........................................................................................................ 538
19.5.2 Longword Access................................................................................................. 538

19.6

Operation .......................................................................................................................... 539
19.6.1 Single Mode (MULTI = 0) .................................................................................. 539
19.6.2 Multi Mode (MULTI = 1, SCN = 0).................................................................... 540
19.6.3 Scan Mode (MULTI = 1, SCN = 1) ..................................................................... 542
19.6.4 Input Sampling and A/D Conversion Time ......................................................... 543
19.6.5 External Trigger Input Timing ............................................................................. 545

19.7

Interrupt Requests ............................................................................................................. 545

19.8

Definitions of A/D Conversion Accuracy ......................................................................... 545

19.9

Usage Note........................................................................................................................ 546
19.9.1 Setting Analog Input Voltage .............................................................................. 546
19.9.2 Processing of Analog Input Pins .......................................................................... 547
19.9.3 Access Size and Read Data .................................................................................. 548

Summary of Contents for SH7706 Series














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SH7706 Series

3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Brand: 3Com Pages: 4
B2 ABB2050 Instruction Manual preview
ABB2050
Brand: B2 Pages: 52
IEI Technology WSB-H610 User Manual preview
WSB-H610
Brand: IEI Technology Pages: 187
IEI Technology TANK-XM811 User Manual preview
TANK-XM811
Brand: IEI Technology Pages: 71
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Brand: Javad Pages: 35
IEI Technology HPE-4S1 Quick Installation Manual preview
HPE-4S1
Brand: IEI Technology Pages: 3
Furuno 001-558-430 Replacement Instructions Manual preview
001-558-430
Brand: Furuno Pages: 24
Supermicro SAS-827HD User Manual preview
SAS-827HD
Brand: Supermicro Pages: 16
STMicroelectronics ST62GP-EMU2 HDS2 Series User Manual preview
ST62GP-EMU2 HDS2 Series
Brand: STMicroelectronics Pages: 58
Valcom VIP-822A Quick Start Manual preview
VIP-822A
Brand: Valcom Pages: 4
Delta Electronics Through Hole Power Inductors 1411 Product Specifications preview
Through Hole Power Inductors 1411
Brand: Delta Electronics Pages: 1
Airlink101 AWMB100 User Manual preview
AWMB100
Brand: Airlink101 Pages: 46
Thermaltake Extreme Spirit Il Instruction preview
Extreme Spirit Il
Brand: Thermaltake Pages: 2
Bridgeworks Tamar FCSAS102800 User Manual preview
Tamar FCSAS102800
Brand: Bridgeworks Pages: 56
Microscan MS-96 Vial Reader User Manual preview
MS-96 Vial Reader
Brand: Microscan Pages: 67
ADTRAN 1202052L1 User Manual preview
1202052L1
Brand: ADTRAN Pages: 136
EMC VNX5300 Block Hardware Information Manual preview
VNX5300 Block
Brand: EMC Pages: 88
Grundfos CIM 060 Installation And Operating Instructions Manual preview
CIM 060
Brand: Grundfos Pages: 40

Brands by name

Popular brands

Load more brands