13 Maintenance and Inspection
13 - 4
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
13-3 Servomotor Lifetime
The lifetimes for the different motor parts are listed below.
The operating conditions are determined as follows.
• Operating ambient temperature: 40°C
• Within the range of allowable axial load
• Rated operation (rated torque and rated rotation speed)
• Installation as specified in this manual
• Operation is not repeated with the motor shaft rotation at an angle of 45° or less, which causes the
fretting.
Oil seal can be replaced for repair.
When the Servomotor is used for a belt hook such as timing pulley, the radial load during motor opera-
tion is generally two or more times the static load. Consult with the belt and pulley manufacturers to
adjust designs and system settings so that the motor allowable axial load is not exceeded even during
operation. If the Servomotor is used under a shaft load that exceeds the allowable limit, the motor shaft
can be broken and the bearings can be damaged.
Additional Information
If the Encoder Lifetime Warning occurs, we recommend you to replace the encoder within a few
weeks.
Name
Lifetime
Bearing
20,000 hours
Decelerator
20,000 hours
Oil seal
5,000 hours (models with oil seal)
Encoder
All 3 kW models and 2 kW 1,000-r/min
(200/400 V) models
30,000 hours
Brake
ON/OFF 1,000,000 times
Summary of Contents for R88D-1SN01H-ECT
Page 827: ......
