Omron R88D-1SN01H-ECT, User Manual

Page: 62 / 828

1 Features and System Configuration
1 - 18 AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
1-5 Applicable Standards
This section describes applicable standards.
The 1S-series Servomotors, Servo Drives, and Footprint-type Noise Filters conform to the following
standards.
Note To conform to EMC Directives, install the Servo Drive and Servomotor under the conditions described in 4-3
Wiring Conforming to EMC Directives on page 4-29.
The Servo Drives and Servomotors comply with EN 61800-5-1 as long as the following installation
conditions (a) and (b) are met.
(a) Use the Servo Drive in pollution degree 2 or 1 environment as specified in IEC 60664-1.
Example: Installation inside an IP54 control panel.
(b) Be sure to connect a fuse, which complies with IEC 60269-1 CLASS gG, between the power supply
and noise filter.
Select a fuse from the following table.
1-5-1 EU Directives
EU Directives Product Applicable standards
EMC Directive Servo Drives EN61800-3 second environment,
C3 Category
(EN 61326-3-1 Functional Safety)
Low Voltage Directive Servo Drives EN 61800-5-1
Servomotors EN 60034-1/-5
Footprint-type Noise
Filters EN 60939-2
Machinery Directive Servo Drives EN ISO 13849-1 (Cat.3)
EN 61508
EN 62061
EN 61800-5-2
Servo Drive model Fuse
R88D-1SN01L-ECT CLASS gG 16A
R88D-1SN02L-ECT CLASS gG 16A
R88D-1SN04L-ECT CLASS gG 16A
R88D-1SN01H-ECT CLASS gG 16A
R88D-1SN02H-ECT CLASS gG 16A
R88D-1SN04H-ECT CLASS gG 16A
R88D-1SN08H-ECT CLASS gG 16A
R88D-1SN10H-ECT CLASS gG 16A
R88D-1SN15H-ECT CLASS gG 40A
R88D-1SN20H-ECT CLASS gG 40A
R88D-1SN30H-ECT CLASS gG 40A
R88D-1SN06F-ECT CLASS gG 20A
R88D-1SN10F-ECT CLASS gG 20A
R88D-1SN15F-ECT CLASS gG 20A
R88D-1SN20F-ECT CLASS gG 20A
R88D-1SN30F-ECT CLASS gG 20A