![background image](http://html1.mh-extra.com/html/omron/r88d-1sn01h-ect/r88d-1sn01h-ect_user-manual_742796293.webp)
4 - 27
4 Configuration and Wiring
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
4-2 Wiring
4
4-
2-4 Pow
er/Brake Co
nnecto
r Att
achment Pr
ocedu
re
This section describes the procedure for attaching the Servomotor power/brake connector.
Use the following procedure to fit the connectors.
1
Align of the main keys of the plug and receptacle.
2
Press in the plug gently and turn the coupling nut clockwise.
Fitting is completed when the turned coupling nut clicks into place.
When fitting is completed, the arrow marks of the plug and receptacle are aligned.
Note Before starting the fitting procedure, make sure that there is no dirt, foreign materials, etc. adhered to the fit-
ting surfaces.
Do not perform the procedure in an environment where water or oil can adhere to these surfaces.
After fitting is completed, pull the plug gently (20 N max.) to confirm that it does not come out.
4-2-4
Power/Brake Connector Attachment Procedure
Main key
Receptacle
Plug
* The arrow mark on the receptacle shell
indicates the position of the main key.
Arrow mark
Press in gently.
Coupling nut
Turn clockwise.
Arrow mark
Summary of Contents for R88D-1SN01H-ECT
Page 827: ......