73
Connecting Cables and Terminating Resistor
Section 3-4
3-4
Connecting Cables and Terminating Resistor
This section describes how to connect Flat Cable I/II or round cable I/II to
Slave Units, Repeater Units, and Terminating Resistors, and how to extend or
branch the cables.
Peripheral Devices Used
Terminating Resistor Specifications
Name
Appearance
Model
Application
Open Type Connector (for
connecting Units)
DCN4-TB4
Converts the Unit's communications con-
nector into a screw terminal block to enable
connecting round cable I or round cable II to
a Slave Unit or Repeater Unit.
Relay terminal block
---
Commercially available Used for T-branching round cable I or round
cable II.
Multidrop Connector
DCN4-MD4
Used to connect Slave Units or Repeater
Units to trunk lines, sub-trunk lines, or
branch lines by using multidrop connec-
tions.
Terminating Resistor
DCN4-TM4
This is a Connector-type Terminating Resis-
tor for Flat Cable I and round cable II.
It is connected to a DCN4-TR4 Flat Connec-
tor Socket at the end of a trunk line or sub-
trunk line.
Terminating Resistor
DCN5-TM4
This is a Connector-type Terminating Resis-
tor for Flat Cable II.
It is connected to a DCN5-TR4 Flat Connec-
tor Socket at the end of a trunk line or sub-
trunk line.
Terminating Resistor
DRS1-T
This is a Terminal Block-type Terminating
Resistor for round cable I.
It is connected to the end of a trunk line or
sub-trunk line round cable I.
Type
Connector
Terminal block
Model
DCN4-TM4
DCN5-TM4
DRS1-T
Resistance
121
Ω
121
Ω
121
Ω
Rated power
1/4 W
1/4 W
1/4 W
Accuracy
1% max.
1% max.
---
Capacity between power supply lines 0.01
µ
F
0.01
µ
F
---
Summary of Contents for CRT1 - 10-2009
