Omron CRT1 - 10-2009, Operation Manual

Page: 126 / 675

102
Connecting External I/O for Slave Units
Section 3-6
The following Slave Units have one or two terminal blocks.
3-6-2 Connecting to e-CON Connector Terminals
For Slave Units with e-CON connector terminals, a special cable connector
must be attached to an external device cable. Follow the procedure below to
attach the connector to the cable.
■
Checking the Cable Connector and Cable Wire Size
The wire size and sheath diameter of applicable cables depend on the type of
cable connector. Use the following table to check that the cable connector and
external device cable wire size and sheath diameter are compatible.
Tyco Electronics Connectors
Sumitomo 3M Connectors
Name Model
Digital I/O Slave
Units Models with 2 terminal blocks CRT1-ID08(-1)
CRT1-OD08(-1)
CRT1-ID16(-1)
CRT1-OD16(-1)
CRT1-MD16(-1)
CRT1-ROS08
CRT1-ROF08
CRT1-ROS16
CRT1-ROF16
Models with 3 terminal blocks CRT1-ID08TA(-1)
CRT1-OD08TA
CRT1-ID08TAH(-1)
CRT1-OD08TAH(-1)
CRT1-ID16TA(-1)
CRT1-OD16TA(-1)
CRT1-MD16TA(-1)
CRT1-ID16TAH(-1)
CRT1-OD16TAH(-1)
CRT1-MD16TAH(-1)
Analog I/O Slave
Units Models with 2 terminal blocks CRT1-AD04
CRT1-DA02
Temperature Input
Units --- CRT1-TS04T
CRT1-TS04P
Expansion Units --- XWT-ID08(-1)
XWT-OD08(-1)
XWT-ID16(-1)
XWT-OD16(-1)
Model Housing color Applicable wire range
3-1473562-4 Orange sheath outer diameter: 0.9 to 1.0 mm Cross-sec-
tional area:
0.08 to
0.5 mm
2
1-1473562-4 Red sheath outer diameter: 0.9 to 1.0 mm
1473562-4 Yellow sheath outer diameter: 1.0 to 1.15 mm
2-1473562-4 Blue sheath outer diameter: 1.15 to 1.35 mm
4-1473562-4 Green sheath outer diameter: 1.35 to 1.60 mm
Model Housing color Applicable wire range
37104-3101-000FL Red
AWG26 (0.14 mm
2
) to AWG24 (0.2 mm
2
),
sheath outer diameter: 0.8 to 1.0 mm
37104-3122-000FL Yellow
AWG26 (0.14 mm
2
) to AWG24 (0.2 mm
2
),
sheath outer diameter: 1.0 to 1.2 mm
37104-3163-000FL Orange
AWG26 (0.14 mm
2
) to AWG24 (0.2 mm
2
),
sheath outer diameter: 1.2 to 1.6 mm