Omron CRT1 - 10-2009, Operation Manual

Page: 576 / 675

552
Temperature Input Unit Functions
Section 11-6
4. Click the Rate of Change Tab and input the desired value for the sampling
cycle.
5. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
6. Click the OK Button and exit the window.
11-6-7 Comparator
Description
When the High High Limit, High Limit, Low Low Limit, and Low Limit are set in
the Unit, a status flag will be turned ON when a value exceeds the set range.
The four set values are High High Limit (HH), High Limit (H), Low Low Limit
(LL), and Low Limit (L). The values are compared with those in Temperature
Data 1. (The comparator function cannot be used with Temperature Data 2.)
The setting range is
−
415,000 to 415,000.
In each case where settings are exceeded, the comparator results bit in the
"Temperature Data Status Flag" is turned ON. If a warning is not set, a Normal
Flag (Pass signal) is turned ON.