Omron CRT1 - 10-2009, Operation Manual

Page: 350 / 675

326
Analog Data Monitor
Section 6-5
Right-clicking on the Analog I/O Slave Unit icon on the Network Configuration
Window when the CX-Integrator is on-line, and selecting "Monitor" enables
displaying of the [Monitor] screen.
Maintenance information is displayed in the status check box at the bottom of
the screen and if the check box is ON, it shows that an error has occurred.
Please see "
11-1 CX-Integrator " on page 481 regarding details for CX-Inte-
grator.
Monitor Window General Tab Page
Item Description
Monitor
Display Comment Displays the text set by the Naming Unit function.
Last Mainte-
nance Date Displays the last maintenance date that was set.
Present Unit Con-
duction Time Displays the total time that the Unit has been ON
(cumulative power ON time).
Present Network
Power Voltage Displays the present network power supply voltage.
Network Power
Voltage (Peak) Displays the maximum and minimum network power
supply voltages up to the present time.
Network Power
Voltage (Bottom)
Status
Check
Boxes Unit Maintenance Selected if the total Unit conduction time has exceed
the monitor value set by the Unit Conduction Time
Monitor Function.
Network Power
Voltage Drop Selected if the network power supply voltage has
fallen below the monitor value set by the Network
Power Voltage Monitor Function.
Cumulated
Counter Over Selected if any of the input's cumulated time counter
values has exceeded the monitor value set by the
Temperature Integration Function.
Unit error Turns ON when an error occurs in one of the units.