Omron CRT1 - 10-2009, Operation Manual

Page: 303 / 675

279
Units with Connectors
Section 5-4
I/O Allocation
The following diagram shows the correspondence between MIL connector pin
numbers and allocated words and bits when the first input word for a Slave
Unit allocated in the Master Unit is m, and the first output word is n.
Dimensions (Same for CRT1-VMD32ML and CRT1-VMD32ML-1)
When a DCN4-TB4 Open Type Connector Is Mounted
Communications Connector Dimensions Including the Connector and Cable
■ When a DCN4-BR4 Flat Connector I Plug Is Mounted
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Input Area
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Output Area
I 10 I 11 I 0 I 1 I 2 I 3 I 4 I 5 I 6 I 7 I 8 I 9 I 12 I 13 I 14 I 15
II 10 II 11 II 0 II 1 II 2 II 3 II 4 II 5 II 6 II 7 II 8 II 9 II 12 II 13 II 14 II 15
Word m
Word n
Bit
16 inputs
16 outputs
...
...
Bit
35
80
90.8
83.7
5
(mm)
98
25.4
(mm)