Omron CRT1 - 10-2009, Operation Manual

Page: 132 / 675

108
Connecting External I/O for Slave Units
Section 3-6
20 Pins (G79-Y
@@@
C)
40 Pins
Pressure-welding a Flat Cable to a MIL Socket
To make your own connecting cable by pressure-welding the flat cable to the
MIL socket, use the components shown in the table below and follow the
directions.
• Required Components
• Procedure
Pin No. Wire color Dots Dot color Pin No. Wire color Dots Dot color
1 Light brown
„
Black 11 Light brown
„„
Black
2 Red 12 Red
3 Yellow Black 13 Yellow Black
4 Red 14 Red
5 Light green Black 15 Light green Black
6 Red 16 Red
7 Gray Black 17 Gray Black
8 Red 18 Red
9 White Black 19 White Black
10 Red 20 Red
Pin No. Wire color Dots Dot color Pin No. Wire color Dots Dot color
1 Light brown
„
Black 21 Light brown
„„„
Black
2 Red 22 Red
3 Yellow Black 23 Yellow Black
4 Red 24 Red
5 Light green Black 25 Light green Black
6 Red 26 Red
7 Gray Black 27 Gray Black
8 Red 28 Red
9 White Black 29 White Black
10 Red 30 Red
11 Light brown
„„
Black 31 Light brown
„„„„
Black
12 Red 32 Red
13 Yellow Black 33 Yellow Black
14 Red 34 Red
15 Light green Black 35 Light green Black
16 Red 36 Red
17 Gray Black 37 Gray Black
18 Red 38 Red
19 White Black 39 White Black
20 Red 40 Red
Number of connector pins Model
10 pins No polarity guide XG4M-1031-T
Uses polarity guide XG4M-1030-T
16 pins XG4M-1630-T
20 pins XG4M-2030-T
40 pins XG4M-4030-T