Omron CRT1 - 10-2009, Operation Manual

Page: 76 / 675

52
Installing Slave Units
Section 3-1
2. Mount the Slave Unit to the Mounting Bracket. The Mounting Bracket is the
same shape as a DIN Track, so use the same method as when mounting
to a DIN Track.
Horizontal Mounting
Use a Mounting Bracket to horizontally mount (side mount) a Slave Unit to a
panel or a wall.
Example: Mounting a CRT1-V @ D32ML Slave Unit with MIL Connectors
Mounting Procedure 1. Attach the Mounting Bracket to the panel surface (or wall) with two Phillips
screws, as shown in the following diagram. For mounting hole dimensions,
refer to
Dimensions above.
2. Mount the Slave Unit to the Mounting Bracket. The Mounting Bracket is the
same shape as a DIN Track, so use the same method as when mounting
to a DIN Track.
Mounting Dimensions
Vertical Mounting to a Wall • Units with e-CON Connectors (CRT1-V @ D08S(-1)/CRT1-VAD04S/CRT1-
VDA02S)
Horizontal (side)
mounting to panel
surface (or wall)
SRT2-ATT02
Mounting Bracket
Panel surface (wall)