Omron CRT1 - 10-2009, Operation Manual

Page: 175 / 675

151
Units with Screw Terminal Blocks
Section 5-3
Replacing Relays
To replace output relays, first remove the cover using the following procedure.
Reference Data The following reference data shows actual measured data from sampling in a
production line. There is some variation in relay characteristics, so use this
data for reference only.
(1) Hook your fingers under the handle and bend it upwards.
(2) The side will bend out in
the direction of the arrow,
releasing the hook.
(3) Using a tool such as a screwdriver, press down on
the relay socket lever and remove the Relay from
the socket.
0.1 0.3 0.5 1 3 5
2
3
5
10
20
30
50
100
200
300
500
0.1
0.3
0.5
1
3
5
10
20
200 500 1000 30 300 50 100
0.2
2
0.2 4
0.4
4
Maximum Switching Capacity Durability Curve
Output current (A)
Number of operations (x10
4
)
Output voltage (V)
Output current (A)
DC resistive load
AC resistive load
120-VAC resistive load
30 VDC, t = 40 ms
30-VDC/240-VAC
resistive load
240 VAC, COS
φ
= 0.4
100 to 200 VDC
t = 7 to 40 ms
120 VAC, COS
φ
= 0.4
30 VDC, t = 7 ms