Omron CRT1 - 10-2009, Operation Manual

Page: 521 / 675

497
Functions of Digital I/O Slave Units
Section 11-3
4. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
5. Click the OK Button and exit the window.
11-3-3 Error Prevention for Surge Current at Startup (Input Units Only)
Description
This function can be used to prevent reading inputs while the I/O power is
OFF and for 100 ms after the I/O power is turned ON (i.e., until the Slave Unit
stabilizes). It helps avoid input errors caused by inrush current from con-
nected devices when the I/O power supply is turned ON. This function is
enabled or disabled by the CX-Integrator or by explicit messages.
Settings Using the CX-Integrator
1,2,3... 1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select
Parameters - Edit from the pop-up menu.)
3. Click the IN Tab, and select Enable for the Sensor Power ON Delay .