Omron CRT1 - 10-2009, Operation Manual

Page: 264 / 675

240
Units with Connectors
Section 5-4
Output Section Specifications
Note Please see " Appendix E: I/O Power Supply Current " regarding the I/O power
supply current supplied to the V and G terminals.
Component Names and Functions (Same for CRT1-MD32S(-1)/CRT1-MD32SH(-1))
Indicator Section
Communications
Indicators Refer to 4-1-3 Communications Indicators .
Item Specification
Model CRT1-MD32S CRT1-MD32S-1 CRT1-MD32SH CRT1-MD32SH-1
I/O capacity 16 outputs
Internal I/O common NPN PNP NPN PNP
Rated output current 0.5 A/output, 4 A/common
Residual voltage 1.2 V max. (0.5 A
DC, between
each output ter-
minal and the G
terminal) 1.2 V max. (0.5 A
DC, between
each output ter-
minal and the V
terminal) 1.2 V max. (0.5 A
DC, between
each output ter-
minal and the G
terminal) 1.2 V max. (0.5 A
DC, between
each output ter-
minal and the V
terminal)
Leakage current 0.1 mA max.
ON delay 0.5 ms max.
OFF delay 1.5 ms max.
Load short-circuit detection --- Supported.
Disconnection detection --- Operates at 3 mA/point max. (Does
not operate at over 3 mA.)
Number of circuits per common 16 outputs/common
Isolation method Photocoupler
Output indicators LED (yellow)
Power supply type Multi-power supply
Current supplied to output
devices 100 mA/output
I/O power supply current con-
sumption 20 mA max. for 24-VDC power supply
voltage 15 mA max. for
24-VDC power
supply voltage 60 mA max. for
24-VDC power
supply voltage
Output handling for communica-
tions errors Select either hold or clear from CX-Integrator.
Communications
indicators:
MS and NS Node address switches:
×
10 and
×
1 (from left)
Input indicators 0 to 15
Communications
connector Output I/O power supply connector
I/O connectors
(e-CON connectors)
Output indicators 0 to 15