Omron CRT1 - 10-2009, Operation Manual

Page: 40 / 675

16
Features of CompoNet Slave Units
Section 1-1
Yes: Supported,
---
: Not supported
Note The Contact Operation Monitor and the Total ON Time Monitor cannot be
used at the same time for the same contact.
Unit Analog l I/O Slave Units
Units with 2-tier
Terminal block
Units with e-CON
Connectors
Units with MIL
Connectors
CRT1-AD04
CRT1-DA02
CRT1-VAD04S
CRT1-VDA02S
CRT1-VAD04ML
CRT1-VDA02ML
Function Input
Units Output
Units
Input
Units Output
Units
Input
Units Output
Units
Operation Time Monitor ---
Contact Operation Monitor ---
Total ON Time Monitor ---
Automatic Baud Rate Detection Yes
Unit Conduction Time Monitor Yes
Naming Units Yes
Naming Connected Devices Yes
Network Power Voltage Monitor Yes
I/O Power Status Monitor ---
Communications Error History Monitor Yes
Input Filter ---
Communications Error Output --- Yes --- Yes --- Yes
Preventing Malfunctions Caused by Inrush
Current at I/O Startup ---
Power Short-circuit Detection ---
Unconnected Line Detection ---
Load Short-circuit Detection ---
Disconnected Line Detection Yes --- Yes --- Yes ---
Removable Terminal Block Structure Yes
Expansion Using Expansion Units ---
Scaling Yes
Last Maintenance Date Yes
Cumulated Count Yes
Moving Average Yes --- Yes --- Yes ---
Setting the Number of AD Conversion Points Yes --- Yes --- Yes ---
Rate of Change Yes --- Yes --- Yes ---
Comparator Yes --- Yes --- Yes ---
Peak/Bottom Hold Yes --- Yes --- Yes ---
Top/Valley Hold Yes --- Yes --- Yes ---
User Adjustment Yes
Top/Valley Count ---
Temperature Range Total Time Count ---
Input Temperature Variation Detection ---
Input Error Detection Disable Function ---