Omron CRT1 - 10-2009, Operation Manual

Page: 525 / 675

501
Functions of Digital I/O Slave Units
Section 11-3
Settings Using the CX-Integrator
1,2,3... 1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select
Parameters - Edit from the pop-up menu.)
3. Click the IN Tab.
4. Double-click the I/O Comment column for the terminal to be set. The Edit
Terminal Window will be displayed. Select Time for the Detection Mode,
enter the monitor value in the Value Field, and then click the OK Button.
5. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
6. Click the OK Button and exit the window.
1.5 s
ON
OFF
Measured approx. every 1 s
Figure C