Omron CRT1 - 10-2009, Operation Manual

Page: 518 / 675

494
Functions Common to All Slave Units
Section 11-2
11-2-8 Last Maintenance Date
Description
This function can be used to write the date for the last date maintenance was
performed in the Slave Unit memory. This makes it easier to decide when the
next maintenance should be performed. This maintenance date can be writ-
ten using the CX-Integrator.
Settings Using the CX-Integrator
1,2,3... 1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select
Parameters - Edit from the pop-up menu.)
3. Click the General Tab and select a date from the Last Maintenance Date
Field. (To enter the current date, select Today from the bottom of the pull-
down menu.)
4. Click the Transfer [PC to Unit] Button to download the data, and then click
the Reset Button to reset the Unit.
5. Click the OK Button and exit the window.